Negotiable
The date of payment from buyers deliver within days
Shandong
Long-term effective
2017-08-22 10:56
284
Company Profile
Shandong Hongtai Science and Technology Co., Ltd.By certification [File Integrity]
Contact:Miss Anna(Mr.)
Email:
Telephone:
Phone:
Area:Shandong
Address:Shandong
Website: http://sdhongtai.bandohk.com/
ZK60A | ASTM B 107/B 107M | ||||||||
Elements | Zn | Zr | Others,total | ||||||
Min % | 4.8 | 0.45 | |||||||
Max % | 6.2 | 0.3 |
AZ31B | ASTM B 107/B 107M | ||||||||
Elements | Al | Zn | Mn | Si | Fe | Cu | Ni | Ca | Others,total |
Min % | 2.50 | 0.60 | 0.20 | ||||||
Max % | 3.50 | 1.40 | 1.00 | 0.10 | 0.005 | 0.05 | 0.005 | 0.04 | 0.3 |
AZ61A | ASTM B 107/B 107M | |||||||
Elements | Al | Zn | Mn | Si | Fe | Cu | Ni | Others,total |
Min % | 5.80 | 0.45 | 0.15 | |||||
Max % | 7.20 | 1.50 | 0.50 | 0.10 | 0.005 | 0.05 | 0.005 | 0.3 |
AZ80A | ASTM B 107/B 107M | |||||||
Elements | Al | Zn | Mn | Si | Fe | Cu | Ni | Others,total |
Min % | 7.80 | 0.20 | 0.12 | |||||
Max % | 9.20 | 0.80 | 0.50 | 0.10 | 0.005 | 0.05 | 0.005 | 0.3 |
WE43B | ASTM B 107/B 107M | |||||||
Elements | Y | Nd | Mn | Zr | Fe | Cu | Ni | Others,each |
Min % | 3.7 | 2.0 | 0.4 | |||||
Max % | 4.3 | 2.5 | 0.03 | 1.0 | 0.01 | 0.02 | 0.005 | 0.01 |
M1C | ASTM B 843 | |||||||
Elements | Al | Si | Mn | Fe | Cu | Ni | Others,each | Others,total |
Min % | 0.50 | |||||||
Max % | 0.01 | 0.05 | 1.30 | 0.03 | 0.02 | 0.001 | 0.05 | 0.3 |
M1A | ASTM B 107/B 107M | |||||||
Elements | Ca | Si | Mn | Fe | Cu | Ni | Others,each | Others,total |
Min % | 1.2 | |||||||
Max % | 0.3 | 0.10 | 2.0 | 0.05 | 0.01 | 0.3 |
99.80A | ASTM B 92M | ||||||
Elements | Na | Sn | Mn | Pb | Cu | Ni | Others,each |
Min % | |||||||
Max % | 0.006 | 0.01 | 0.10 | 0.01 | 0.02 | 0.001 | 0.05 |
AZCOM | |||||||||
Elements | Al | Zn | Mn | Si | Fe | Cu | Ni | Ca | Others,total |
Min % | 2.2 | 0.4 | 0.15 | ||||||
Max % | 2.6 | 0.6 | 1.00 | 0.10 | 0.005 | 0.1 | 0.03 | 0.04 | 0.3 |
Grade |
Specification of current products |
ZK60A | Φ100mm,Φ120mm,Φ260mm,Φ482mm |
AZ31B | Φ100mm,Φ120mm,Φ181mm,Φ201mm,Φ230mm,Φ260mm,Φ482mm |
AZ61A | Φ100mm,Φ260mm,Φ482mm |
AZ80A | Φ100mm,Φ260mm,Φ482mm |
WE43B | Φ120mm,Φ260mm |
99.80A | Φ181mm,Φ201mm,Φ230mm |
M1C | Φ120mm,Φ181mm,Φ201mm,Φ230mm |
M1A | Φ181mm,Φ201mm,Φ230mm |
AZCOM | Φ120mm,Φ181mm,Φ201mm,Φ230mm,Φ260mm,Φ482mm |
Diameter of casting ingots |
Allowable tolerance of diameter |
Allowable tolerance of length |
Curvature |
End oblique cutting |
|||
Long ingots |
Short ingots |
Per meter |
Overall length |
||||
Less than | |||||||
<200 | ±3 | ±1 | +10 0 |
The cutting right angle should not exceed 1 degree |
|||
≥200~<300 | ±3 | +0 -1.6 |
5 | 15 | |||
≥300~500 | ±4 | 3 |